Chapter 2 Installing the Sun Solaris 10 Operating System. The Sun Solaris 10 operating system. Ok boot cdrom - install SC Alert: Host System has Reset Probing. Jun 16, 2005 I have a sparc 5 system and i want know how to install solaris 10. I downloaded the cd from the sun website and when i put it into my system and type boot.
I have a sparc 5 system and i want know how to install solaris 10. I downloaded the cd from the sun website and when i put it into my system and type boot cdrom it says: ok boot cdrom Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args: netbsd boot: cannot open netbsd Enter filename netbsd: I dont know what to type here. Or even if i am supposed to be doing this. Thnx in advance P.S. Im a newb hey ware kan y download the hole fershen of solaris 10 for intel ken you kiff my the hole link pleas.
Installing Sun Solaris 10 Return to Solaris Home Page. Installing Sun Solaris 10 by Jeff Hunter, Sr. Database Administrator Contents. Overview This article documents installing the 6/06 (June 2006) release of Solaris 10 from CD-ROM.
For the purpose of this example, I will be installing Solaris 10 on a Sun Blade 150 with the following configuration:. Sun Blade 150 (UltraSPARC-IIe 650MHz), No Keyboard, OpenBoot 4.6. 1,792 MB RAM Memory.
Two - 40 GB IDE Western Digital Hard Drives - ( /dev/dsk/c0t0d0 and /dev/dsk/c0t2d0). Built-in Ethernet - ( eri0). CDROM - ( /dev/dsk/c0t1d0) Installing Solaris 10 will require 5 CDs found in the Solaris media kit labeled ' Solaris 10 Software' or downloaded from - (Solaris 10 6/06).
Before starting the installation process, ensure that you have noted the following items:. Determine the host name of the system you are installing. Determine the language and locales you intend to use on the system. If you intend to include the system in a network, gather the following information:. Host IP address. Subnet mask.
Type of name service (DNS, NIS, or NIS+, for example). Domain name. Host name of server.
Host IP address of the name server Using Serial / Console Connection For a complete discussion of connecting to a Sun serial console from Linux, see my article '. For this particular installation, I will NOT be using a VGA monitor connected to the built-in frame-buffer (video card). The installation will be done using the serial port of the Sun Blade as a console. A serial cable (null modem) will be connected from the serial port of a Linux machine to the serial port of the Sun Blade. Keep in mind that you will not be able to make use of the serial console of the Sun Blade if it was booted with the keyboard/mouse plugged in.
In order to make use of the serial console, you will need to disconnect the keyboard/mouse and reboot the Sun server. On the Sun Blade 100/150, if the keyboard/mouse are plugged in during the boot phase, all console output will be redirected to the VGA console. From the Linux machine, you can use a program called minicom. Start it up with the command ' minicom'. Press ' Ctrl-A Z' to get to the main menu. Press ' o' to configure minicom.
Go to ' Serial port setup' and make sure that you are set to the correct ' Serial Device' and that the speed on line E matches the speed of the serial console you are connecting to. (In most cases with Sun, this is 9600.) Here are the settings I made when using Serial A / COM1 port on the Linux machine: +-+ A - Serial Device: /dev/ttyS0 B - Lockfile Location: /var/lock C - Callin Program: D - Callout Program: E - Bps/Par/Bits: 9600 8N1 F - Hardware Flow Control: Yes G - Software Flow Control: No Change which setting? +-+ After making all necessary changes, hit the ESC key to go back to the ' configurations' menu. Now go to ' Modem and dialing'. Change the ' Init string' to ' ^M'. Save the settings (as dflt), and then restart Minicom. You should now see a console login prompt.
root@bertha1 root# minicom Welcome to minicom 2.00.0 OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n Compiled on Feb 17 2004, 04:52:10. Press CTRL-A Z for help on special keys alex console login: root Password: Last login: Tue Nov 4 18:55:41 on console Nov 7 12:17:24 alex login: ROOT LOGIN /dev/console Sun Microsystems Inc. SunOS 5.8 Generic Patch October 2001 # # init 0 INIT: New run level: 0 The system is coming down.
System services are now being stopped. Print services stopped. Nov 7 12:17:38 alex syslogd: going down on signal 15 The system is down. Syncing file systems. Done Program terminated ok Starting the Installation The installation process starts at the ok prompt. The previous section of this document provides the steps required to not only gain access to the console port of the Sun SPARC server, but also how to get the server to an ok prompt.
If when logging on, the machine is already booted into the O/S, (you have a console login like the following: ' alex console login:'), you will need to bring the machine to its EEPROM ( ok prompt) by initiating init 0 like in the section above. The first step in installing Solaris 10 is to boot the machine from Disk 1 of the Solaris 10 Software CDs. You will need to get the machine to the ok prompt.
You can do this by shutting the system down using init 0. Once at the ok prompt, type in boot cdrom. (Or in some cases, you can use reboot cdrom).
From here, the installation program prompts you for system configuration information that is needed to complete the installation. If you were performing a network installation, you would type: ok boot net In almost all cases, you will be installing the Solaris 10 software on a new system where it will not be necessary to preserve any data already on the hard drive. Using this assumption, I will partition the first single 40 GB IDE hard drive ( /dev/dsk/c0t0d0) as the system disk. Answering the Screen Prompts Let's start the installation process! Put the Solaris 10 Software (Disk 1 of 5) in the CDROM tray and boot to it: Solaris Installation Boot Screen ok boot cdrom Resetting. Sun Blade 150 (UltraSPARC-IIe 650MHz), No Keyboard Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.6, 1792 MB memory installed, Serial #52928138. Ethernet address 0:3:ba:27:9e:8a, Host ID: 83279e8a. Rebooting with command: boot cdrom Boot device: /pci@1f,0/ide@d/cdrom@1,0:f File and args: SunOS Release 5.10 Version Generic118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
Solaris 10 Install Package
Configuring devices. Using RPC Bootparams for network configuration information. Attempting to configure interface eri0.
SUNW,eri0: 100 Mbps full duplex link up Configured interface eri0 Beginning system identification. Searching for configuration file(s).
Search complete. Discovering additional network configuration. The boot process may take several minutes to complete, but once done, you will start answering a series of prompts. The following section will walk you through many of the screen prompts from the installation. The first two prompts are from the command line interface (CLI) and are used to specify the language and terminal.
Use English for the Language. As for a terminal setting, I commonly telnet to a Linux server (that is connected from the serial port of the Linux server to the serial port of the Sun machine). From the Linux server, I use ' minicom' to connect from the Linux server to the Sun server. The best terminal for this type of installation is ' DEC VT100': Language: English What type of terminal are you using?: 3) DEC VT100 You should be able to use a terminal type of 'DEC VT100' or 'X Terminal Emulator (xterms)'. Depending on the terminal being used for installation while using the command line interface, it may be required to precede any of the function key responses (i.e. F2Continue) with the ESC key (i.e. ESC - F2Continue).
For the purpose of this installation, I am using minicom 2.0 and configured the installation to use a DEC VT100 terminal. Given this configuration I did not have to precede any of the function key responses with the ESC key. Many of the screens to follow will ask you about networking information. When asked if the system will be connected to a network, answer Yes. Many of the screens should be easy to complete except for the ' Names Services' section. In almost all cases, you will want to use DNS naming services, but if your machine is not currently configured within DNS, this section will fail and no information entered about Names Services will be stored and configured. If this is the case, you will need to select None under the Names Services section.
Cd-rom Install
The network configuration will then need to be completed after the installation process by updating certain network files on the local hard drive. This will be documented in the ' Post Installation Procedures' of this document.
Screen 1: The Solaris Installation Program This is the Solaris Installation Welcome screen. Hit F2 to continue Screen 2: Identify This System This screen informs you about how you will need to identify the computer as it applies to network connectivity. Hit F2 to continue Screen 3: Network Connectivity Networked - X Yes No Hit F2 to continue Screen 4: DHCP Use DHCP - Yes X No Hit F2 to continue Screen 5: Host Name for eri0 Enter the host name which will identify this system on the network.
Sales taxes and shipping costs are estimates; please check store for exact amounts. Cabbage patch lil sprouts dolls. Although we make every effort to present accurate information, Bizrate is not responsible for inaccuracies. Product specifications are obtained from merchants or third parties.
For the purpose of this example, I will use the host name ' alex'. Host name for eri0: alex Hit F2 to continue Screen 6: IP Address for eri0 Enter the Internet Protocol (IP) address for this network interface.
Dosbox Cd-rom Install
IP address for eri0: 192.168.1.102 Hit F2 to continue Screen 7: Subnet for eri0 On this screen you must specify whether this system is part of a subnet. For the purpose of this example, this interface will be part of a subnet. System part of a subnet - X Yes No Hit F2 to continue Screen 8: Netmask for eri0 Netmask for eri0: 255.255.255.0 Hit F2 to continue Screen 9: IPv6 for eri0 In this example, I will not be enabling IPv6. Enable IPv6 for eri0 - Yes X No Hit F2 to continue Screen 10: Set the Default Route for eri0 I will manually specify the IP address of my router. Default Route for eri0 - Detect one upon reboot X Specify one None Hit F2 to continue Screen 11: Default Route IP Address for eri0 Router IP Address for eri0: 192.168.1.1 Hit F2 to continue Screen 12: Confirm Information for eri0 This is a confirmation screen.
Verify all data is correct. Host name: alex IP address: 192.168.1.102 System part of a subnet: Yes Netmask: 255.255.255.0 Enable IPv6: No Default Route: Specify one Router IP Address: 192.168.1.1 Hit F2 to continue Screen 13: Configure Security Policy Configure Kerberos Security - Yes X No Hit F2 to continue Screen 14: Confirm Information This is a confirmation screen. Verify all data is correct. Configure Kerberos Security: No Hit F2 to continue Screen 15: Name Service Name service - NIS+ NIS X DNS LDAP None Hit F2 to continue Screen 16: Domain Name Host name: idevelopment.info Hit F2 to continue Screen 17: DNS Server Addresses Server's IP address: 63.67.120.23 Server's IP address: 63.67.120.14 Server's IP address: Hit F2 to continue Screen 18: DNS Search List Search domain: Search domain: Search domain: Search domain: Search domain: Search domain: Hit F2 to continue Screen 19: Confirm Information This is a confirmation screen. Verify all data is correct.